Miniature S Beam Load Cell
LC2306
Miniature S Beam Load Cell Compact design, alloy steel or stainless steel construction, Small capacity, high accuracy. IP65+rated with temperature compensation. Output options: mV/V, 4-20mA, RS485. Miniature s beam load cell Ideal for micro scales, automation, medical devices, and industrial force control. Operating range: -20°C to +60°C, 150%FS overload protection.
Quantity:
Miniature S Beam Load Cell Compact design, alloy steel or stainless steel construction, Small capacity, high accuracy. IP65+rated with temperature compensation. Output options: mV/V, 4-20mA, RS485. Miniature s beam load cell Ideal for micro scales, automation, medical devices, and industrial force control. Operating range: -20°C to +60°C, 150%FS overload protection. (miniature s beam load cell, Saintbond miniature s beam load cell, 10n load cell )
LC2306 Miniature S Beam Load Cell Dimension:
| Cap. | A | B | C | D | E | M |
| 0-5N-30N | 16 | 19.1 | 5 | 6.7 | 17 | M3 Depth 3 mm |
| 0-50N | 16 | 19.1 | 6 | 7.5 | 17 | M4 Depth 3 mm |
Note:
1:Screws should not be screwed too deep and shall not exceed 4 millimeters. You should not touch the middle part of the sensor so as not to affect the measurement result.
When the
2:Sensor is installed, the two sides of the cover plate can not be contacted with the middle cylinder, so as to avoid measuring the result
| Capacity | A | B | C | M |
| 0-100N-500N | 16 | 19.1 | 6 | M4 Depth 3 mm |
| 0-200N-2KN | 26 | 40 | 12 | M8 Depth 8 mm |
Note:screws must not be screwed too deep when they are installed. You should not touch the middle part of the sensor so as not to affect the measurement result.
LC2306 Miniature S Beam Load Cell Description:
Ultra small installation size, width of only 5 mm, height of 19.1 mm; high speed dynamic response output, high accuracy; measuring force: internal thread tension or compression direction. Widely used in automatic force detection, typical applications: key detection.
LC2306 Miniature S Beam Load Cell Technical Parameter:
| Capacity | 0-5N~2000N | Material | Stainless Steel |
| Rated output | 2.0 ±10% mV/V | Output Impedance | 350±3Ω |
| Non-linearity | 0.05 % F.S. | Insulation | >5000MΩ/10VDC |
| Hysteresis | 0.05 % F.S. | Recommended Excitation | 2.5-5V |
| Repeatability | 0.05 % F.S. | Excitation max | 10V |
| Creep(30min) | 0.05 % F.S. | Compensated Temp Range | -10~60℃ |
| Temp Effect On Output | 0.1 % F.S./ 10℃ | Operating Temp Range | -20~80℃ |
| Temp Effect On Zero | 0.1 % F.S./ 10℃ | Safe Load | 1.2 |
| Protection Class | IP 65 | Ultimate Load Limit | 1.5 |
| Input Impedance | 350±15Ω | Cable Length | ∅2-3 x 3m |
