Torsion Load Cell
LC6302
LC6302 torsion load cell / Column torsion load cell in a sealed case, with raised end load bearing faces and hole right through. For use in compression or in fail-safe tensile applications. The LC6302 Column torsion load cell / through hole torsion load cell is ideally suited to engineering force measurements including through center safety testing of cables, rods and bolts. It is designed for easy installation, usually between two flat faces bearing on its loading rings, either unattached or with retaining spigots positioned in the center hole. Alternatively tensile load transfer can be achieved via a tie rod assembly through the center hole. In this way the Column torsion load cell can indirectly measure tensile loads in a "fail-safe" mode. We are happy to design variants of this load cell to meet your specific requirements.
Quantity:
LC6302 torsion load cell / Column torsion load cell in a sealed case, with raised end load bearing faces and hole right through. For use in compression or in fail-safe tensile applications. The LC6302 Column torsion load cell / through hole torsion load cell is ideally suited to engineering force measurements including through center safety testing of cables, rods and bolts. It is designed for easy installation, usually between two flat faces bearing on its loading rings, either unattached or with retaining spigots positioned in the center hole. Alternatively tensile load transfer can be achieved via a tie rod assembly through the center hole. In this way the Column torsion load cell can indirectly measure tensile loads in a"fail-safe"mode. We are happy to design variants of this load cell to meet your specific requirements. ( torsion load cell, Column torsion load cell, through hole torsion load cell )
LC6302 Torsion Load Cell Introduction:
✅ Hollow design, high precision, strong anti-bias load capacity;
✅ Suitable for extrusion, assembly, material tank, material mechanics testing machine and other fields;
LC6302 Torsion Load Cell Application:
Pressure Testing Machine, Large Hydraulic Machinery Equipment, Large Range Force Measurement and Various Weighing Testing in Colleges and Universities, Large Industrial Weighing Control System;
LC6302 Torsion Load Cell Dimension:mm
Note:The overall dimensions can be customized according to the customer's requirements:
LC6302 Torsion Load CellTechnical Parameter:
| Rated Load: | 10/20/25/30t | Operating Temperature Range: | -30~+70℃ |
| Sensitivity: | (2.0±0.1%) mV/V | Maximum Safe Over Load: | 150%F.S |
| Combined Error: | ±0.1% F.S | Ultimate Over Load: | 200%F.S |
| Creep Error(30min): | ±0.05% F.S | Recommend Excitation Voltage: | 10~12V DC |
| Zero Balance: | ±1% F.S | Maximum Excitation Voltage: | 15V DC |
| Temp. Effect On Zero: | ±0.02% F.S/10℃ | Sealing Class: | IP67 |
| Temp. Effect On Span: | ±0.02% F.S/10℃ | Element Material: | Alloy Steel/Stainless Steel |
| Input Resistance: | 750±5Ω | Cable: | Length=L:12m |
| Output Resistance: | 703±2Ω | Citation: | GB/T7551-2008/ OIML R60 |
| Insulation Resistance: | ≥5000MΩ | Mode Of Connection: | Black(Input-),White(Output-) |
| Red(Input+),Green(Output+), |
