S Beam Load Cell
LC253
Saintbond s load cells for weighing applications is known as s type load cells for weighing because of its feasured s beam structure,Rod end load cells for weighing LC252 is able to measure both tension force and compression force.The S beam load cells for weighing applications can convert load or force acting on it into electronic signal which is proportional to the applied force.The acting force causes deformation of the measuring element,the bonded strain gage deforms accordingly which will cause the resistance change of the wheatstone bridge,under constant power supply,the output signal between Sig+ and Sig- will change proportionally,thus the load/force can be measured by measuring the output signal from the load cells for weighing.
Quantity:
Saintbond s load cells for weighing applications is known as s type load cells for weighing because of its feasured s beam structure,Rod end load cells for weighing LC252 is able to measure both tension force and compression force.The S beam load cells for weighing applications can convert load or force acting on it into electronic signal which is proportional to the applied force.The acting force causes deformation of the measuring element,the bonded strain gage deforms accordingly which will cause the resistance change of the wheatstone bridge,under constant power supply,the output signal between Sig+ and Sig- will change proportionally,thus the load/force can be measured by measuring the output signal from the load cells for weighing. ( s beam load cell, Saintbond s load cells for weighing, load cells for weighing )
LC253 S Beam Load Cell Features:
✅ Rod end load cell,s beam structure;
✅ Strain gauge technology,analog output;
✅ Tension and compression force measurement;
✅ Widely used for testing machine,press force test,keyboard testing,auto equipment,production line,press machine.etc;
Applications:
Suspended tanks and hoppers, crane scales.
LC253 S Beam Load Cell Dimension:
| Capacity(kg) | L | W | H | M |
| 5/10/20/30/50 | 50.8 | 12.7 | 63.5 | M8*1.25 |
| 100/200/300 | 50.8 | 19 | 76.2 | M12*1.75 |
LC253 S Beam Load Cell Technical Parameter:
| Capacity | 50/100/150kg | Output Impedance | 350±5Ω |
| Rated output | 2.0 ±10% mV/V | Insulation | >5000MΩ/10VDC |
| Non-linearity | ±0.5 % F.S. | Recommended Excitation | 5-15V |
| Hysteresis | ±0.5% F.S. | Excitation max | 10V |
| Repeatability | ±0.3% F.S. | Compensated Temp Range | -10~60℃ |
| Creep(30min) | ±0.3% F.S. | Operating Temp Range | -20~80℃ |
| Temp Effect On Output | 0.02 % F.S./10℃ | Safe Load | 1.2of F.S |
| Temp Effect On Zero | 0.04% F.S./10℃ | Ultimate Load Limit | 1.5of F.S |
| Input Impedance | 380±30Ω | Material | Alloy/Stainless steel |
