Instructions for the use and maintenance of loaded cement truck weight

Instructions for the use and maintenance of loaded cement truck weight

Keyword: right weigh trailer scale, loaded cement truck weight, mixer truck weight

The working principle of a loaded cement truck weight is:

When weight is applied to the loaded cement truck weight scale platform, the sensor on the loaded cement truck weight scale platform releases a voltage signal, and the output signal is proportional to the loaded cement truck weight scale weight. The signal is transmitted to an amplifier for amplification, and then converted into a digital signal through an analog-to-digital converter for display on a monitor. The main function of a loaded cement truck weight is to weigh the weight of each wheel on the weighing platform when the vehicle is dynamically passing or stationary on a certain width, and then calculate the accumulated weight of the axle and total weight. Calculate the wheel weight of the car using a single board, and the axle weight using two boards. According to the axle type of the vehicle, the total weight of the vehicle can be accumulated. The overload process is a complex real-time process that requires sensors to quickly collect the axle weight of the vehicle and calculate the total weight.

Loaded cement truck weight are widely used in highway transportation load control, highway law enforcement inspections, automotive safety performance testing, urban waste disposal, and more. The development of loaded cement truck weight is very convenient for municipal and security departments to carry. Nowadays, loaded cement truck weight are gradually being adopted in various industries because they are convenient, lightweight, and easy to carry;

The loaded cement truck weight consists of two thin weighing platforms, two sets of four approach bridges, and a weighing indicator display. The loaded cement truck weight weighing platform is made of high-strength aluminum alloy material, which is simple and durable, with good protection system performance. It has multiple weighing ranges and high resolution, and can be used for dynamic and static management and effective weighing of vehicles of different types in enterprises.

How to use the right weigh trailer scale correctly:

The right weigh trailer scale adopts high-precision sensors. After years of user experience, Ningbo Saintbond has concluded that the product is at the forefront of comparison in terms of accuracy, stability, water quality, and repeatability, and has become a trusted unit in terms of reputation and quality. The effective size of the right weigh trailer scale weighing platform is available in multiple options; The right weigh trailer scale is made of materials, lightweight, and comes with a built-in approach bridge; Therefore, the system is easy to carry, transport, and install. At the same time, the system adopts a Chinese menu operation, and the instrument has improved functions such as display, setting, correction, operation, printing, and communication, making it simple and clear to use.

Components of mixer truck weight:

It consists of two ultra-thin mixer truck weight weighing platforms, two sets of four approach bridges, and one weighing display device. The mixer truck weight weighing platform is made of high-strength aluminum alloy, which is simple, lightweight, sturdy and durable, with a protection performance of IP67 level requirements. Ultra thin steel sensor, using laser welding sealing technology, compact structure, anti eccentric load, strong overload capacity, long-term stability, and good sealing performance. The sturdy rubber ramp, properly connected to the weighing platform, can maintain the balance of the vehicle even in an unbalanced weighing state, ensuring that the mixer truck weight weighing platform does not jump during weighing. Portable instrument, dual-use for AC and DC, integrated display and printing, convenient and fast, stable and reliable. The simple layout, the stress sensing method of the portable wheel load gauge, multiple weighing ranges, and high resolution make it suitable for different types of vehicles for effective weighing in both dynamic and static conditions.

Daily precautions for loaded cement truck weight:

1: Before starting the loaded cement truck weight, first pull out the locking pin of the table, and then lock the table.

2: Vehicles with the rated load of loaded cement truck weight test bench are prohibited from driving on the side slide table.

3: Do not park vehicles or pile up debris on the side sliding platform for loaded cement truck weight.

4: When using a loaded cement truck weight, do not let dirty vehicles come directly. It should be cleaned first and wait until there is less dripping water.

5: Vehicles must be drained on rainy days only when there is less water dripping.

6: It is strictly prohibited to let water enter the side slide table. Keep the sensor dry to ensure its normal operation.

7: To test accuracy, the mixer truck weight sensor needs to be preheated for 30 minutes.

8: The tire pressure of the waiting vehicle should comply with the regulations for automobiles.

9: Mixer truck weight prohibit vehicles from turning or braking on the platform.

10: When testing a mixer truck weight, it is required to move at a constant speed and not to turn the direction, suddenly add or remove fuel, or step on the clutch, otherwise it will affect the accuracy of the test.

11: Daily cleaning of the sliding table should be carried out daily to remove dirt from the table surface, gaps, and the ground around the equipment.

Note: The surface of the table cannot be wiped with liquid, and there should be no scratches during wiping.

Regular maintenance of mixer truck weight:

1: Use for 3 months, check the surface cleanliness of all moving parts of the equipment and clean them.

2: After 6 months of use, in addition to carrying out the first task, it is also necessary to lubricate and lubricate all moving parts inside the platform; Check if the bearing table is stable at all four corners. If there is any abnormality, lift it out of the table. Add shims under the pulley guide to restore the stability of the table..

3: After 10 months of use, it should be done regularly (with a maximum interval of 12 months between two sessions).

Common faults and troubleshooting methods for loaded cement truck weight: Proper daily maintenance and upkeep can prevent many faults from occurring. The structure and electrical design of loaded cement truck weight are simple, and the possible problems are as follows: Common troubleshooting methods for portable weighing scale instruments.

1: The mixer truck weight cannot operate: check if the power is connected.

2: The mixer truck weight cannot move in a certain direction: check if the limit switch in that direction is damaged, resulting in incorrect limit signals; Check if the path of the movement signal in that direction is blocked; Check if the output of the steering control circuit board is normal; Check if the brake is released; Check if the starting capacitor of the motor has failed, etc.

3: The endpoint position of the mixer truck weight movement is incorrect: check if the limit switch is damaged, if the limit block is loose, or if the position is installed improperly.

4: During the movement of mixer truck weight, there is shaking: check whether the relays on the signal path have poor contact and whether the wiring joints are loose.

Maintenance and upkeep of automobile axle load gauge:

1: The loaded cement truck weight must be cleaned after use, and any dirt on the table and in the gaps must be disposed of;

2: Check if the upper surface of the axle load platform is in its normal position after the impact of the vehicle. The normal position of the upper surface refers to the weighing area of the axle load platform;

3: The base of a portable weighing scale should be kept level.

4: Loaded cement truck weight should not be affected by external light.

5: There must be no foreign objects stuck under the weighing platform.

6: Scale operators must undergo training before operating, and repair personnel must not disassemble any components without mastering the necessary knowledge to avoid affecting measurement accuracy or damaging the system.

7: The operator of the mixer truck weight must thoroughly digest and absorb the instructions of the instrument, master the basic principles, and be familiar with the maintenance methods of the instrument before it can be officially operated and used.

8: Before powering on the system, it is necessary to check whether the power and grounding devices are reliable. When shutting down after work, the instrument power plug must be unplugged and the power supply must be cut off.

The above are some precautions for using mixer truck weight. During use, the operating procedures should be standardized to prevent accidents and unnecessary losses from the source!